Front end repair questions

[KingofPaint]

What is the difference between the lower a-arm on the 05 and 06?

With a slp cold air intake is it necessary to delete the intake air sensor? Is there a common reason mine might have been removed?

Is anyone familiar with the large holes drilled in the sides of my belly pan? Is this for intake air flow or extra cooling or both or neither?

 

[DAVIDS_OFFROAD]

Unsure about the large holes in the pan.. Or the control arms... Part numbers are different but seem the same to me. As far as the air flow meter you need that for sure!

 

[guidoxpress]

Large holes should have a screen installed over it right? It's just for added air flow.

The intake sensor needs to stay connected but can be placed anywhere, try and get it in the air flow by the intake somewhere at least.

The arms have a slight geometry to difference cause the spindles are diff. Stick with 06-up if u can or at least match the lowers to same year


Sent from my iPhone using Tapatalk

 

[sleddude]

What is the difference between the lower a-arm on the 05 and 06?

With a slp cold air intake is it necessary to delete the intake air sensor? Is there a common reason mine might have been removed?

Is anyone familiar with the large holes drilled in the sides of my belly pan? Is this for intake air flow or extra cooling or both or neither?

This air sensor is a must or you will possibly burn down your engine. The SLP air box has mounting holes for the sensor so pretty weird it's been deleted.

 

[KingofPaint]

Lights been flashing for four years. Just noticed it did not exist when I removed the intake to replace the belly pan. It seemed weird to me also as there is clearly a mounting hole for it.