I bought a m8 snopro 153 last friday and my pump sucks it took about 15 min. of pumping just to get it from 100 to 125, it feels like it only pumps the last 1/2 inch of the stroke. anyone else ? maybe I should put a couple of drops of light oil in the plunger
Good day, i also thought my new pump was screwed until i seen a guy on tv using one. Trick is lift rear of sled off of the ground and pump the pump as hard and fast as you can. Will only take a couple of seconds to get the pressure where you want it. Just went through this 2 days ago myself.;
at first I had to find a comfy position so not to hit the bleeder, then we lifted the weight off the sled, and finally I pumped like a banshee to get it up. its something that I dont want to do on the trail again. is there a aftermarket co2 thingy, that would be nice
i had to ride over to a near sled shop and we know the owner very well and his son is the best mecanic i know,he pumped my rear float from 125 -135 in like 20 pumps and btw we just tossed the sled on its side