I see a lot of screen kits for the footwell on the RMK but have not seen one for the SBA. Does anyone know who makes one?
Sent from my DROID RAZR using Tapatalk
Sent from my DROID RAZR using Tapatalk
Foot well screen for SBA
- Thread starter Dirty Steve
- Start date
They are very easy to build yourself. If you have access to anywhere that sells stainless screen, such as an agricultural irrigation supply store, feed store, etc., use a pair of quality tin snips to cut out vent. Make a template from thicker cardboard paper, such as the back of a notepad. In stall with 2 self tapping 1/2" long stainless screws, 1 in top and one on side. You can prime and paint to match also. I've made several sets, really easy, for a tenth of what they are too purchase. If you don't want to make or don't have the tools, message me with your address, I will send you a set, I have extras I've made for friends, if you like them we can figure out what you think they're worth, if you don't you can send back. Probably looking at less than $10 in material, and that's on the high end I'd think.
Pray for SNOW!
Pray for SNOW!
We have a lot of those type of stores around. What do I ask for? What is that screens original purpose? I have bought some cardboard grid paper to begin to make a template. The SBA screen will have to have a bend in it , but shouldn't be that tough. I just didn't have a good material to start with, but that screen looks like it would be the ticket
Sent from my DROID RAZR using Tapatalk
Sent from my DROID RAZR using Tapatalk
