Hit a stump with my sled the other day and messed up the front end. thinking about parting it out and starting my nypex build. Here is whats on the sled.
VE tunnel 162 powdercoated black with silver coolers
162 CE
fastrax M10 rear skid
Powderlites 2860 turbo w/ boost it kit and Electronic boost controler w/ fuel tank
Boss Seat
11" RSI Risers
Both clutches
Barkbuster front suspension (see below)
OFT Racing steering bushings
Brand new Mountain fit hood thats been cut out for Turbo intake
Simmons gen 3 skis.
GYTR piggyback front shocks (see below)
CR Steering post
Silver yamaha/skinz front bumper (scratched)
Avid drivers
Bulkhead has been dropped and rolled by VE
Stock chain case no reverse
Plus all the little stuff
Whats damaged is the left footwell, Left shock the rod is bent rest is good. Should be rebuildable, Left Spindle is bent, belt cover is bent, front subframe where a arms bolt to left side lower a arm mount is broke. Lower left body panel is no good. Both body panels left and right the upper part that hooks on to the tab is broke. The rest is in good shape. Id rather not sell the motor but for the right price it can be had too. Its only got 20 miles on it. Carrillo rods, wiseco 10:1 pistons, ARP head studs, no shim. The turbo has about 800 miles on it. Boost-it kit has 20 miles
I will only part out if the major stuff can be spoken for. Ive been pondering the idea of a Nypex build and well this would be perfect timing. Any questions just let me know. So if youd be interested in anything let me know and ill start a list and see if its worth parting out or if ill just fix the front.
here is a picture of the sled from last year. Before the Front bumper. I can take a picture tomorrow but its basically the same except for the broken pieces listed above
![](http://i1115.photobucket.com/albums/k544/philsummers21/Tapex1.jpg)
VE tunnel 162 powdercoated black with silver coolers
162 CE
fastrax M10 rear skid
Powderlites 2860 turbo w/ boost it kit and Electronic boost controler w/ fuel tank
Boss Seat
11" RSI Risers
Both clutches
Barkbuster front suspension (see below)
OFT Racing steering bushings
Brand new Mountain fit hood thats been cut out for Turbo intake
Simmons gen 3 skis.
GYTR piggyback front shocks (see below)
CR Steering post
Silver yamaha/skinz front bumper (scratched)
Avid drivers
Bulkhead has been dropped and rolled by VE
Stock chain case no reverse
Plus all the little stuff
Whats damaged is the left footwell, Left shock the rod is bent rest is good. Should be rebuildable, Left Spindle is bent, belt cover is bent, front subframe where a arms bolt to left side lower a arm mount is broke. Lower left body panel is no good. Both body panels left and right the upper part that hooks on to the tab is broke. The rest is in good shape. Id rather not sell the motor but for the right price it can be had too. Its only got 20 miles on it. Carrillo rods, wiseco 10:1 pistons, ARP head studs, no shim. The turbo has about 800 miles on it. Boost-it kit has 20 miles
I will only part out if the major stuff can be spoken for. Ive been pondering the idea of a Nypex build and well this would be perfect timing. Any questions just let me know. So if youd be interested in anything let me know and ill start a list and see if its worth parting out or if ill just fix the front.
here is a picture of the sled from last year. Before the Front bumper. I can take a picture tomorrow but its basically the same except for the broken pieces listed above
![](http://i1115.photobucket.com/albums/k544/philsummers21/Tapex1.jpg)