F/S: CARL'S 860 TOP END & CRANK (CARBED) ""CHEAP"

[Pwdrhnd]

I have a top end and Crank to a 2008 Carl's Cycle 860 (carbed) for sale. Its based of the 600 bottom end. The sled lost a wrist pin bearing so I'm parting it out. Below is what is included:

Head: 1 dome needs replaced
(2) cylinders: 1 needs replated
(2) power valves
(1) stroker crank (70mm)
(1) set of SLP twin Pipes w/ y-pipe and canister (ceramic)
(1) seto rack carbs bored to 42mm

This kit new cost over $5,000.00. NOT INCLUDING CARBS.

So if you have a small bock 600 you'd like to make a rocket ship for a 1/3 of what it would normally cost,,,,,,,,,here's your chance....

I'm fire selling this thing for cheap!!!!

FIRST $1,850.00 PLUS SHIPPING TAKES IT.


I also have other parts if need be ie: flywheel,stator,oil pump,cdi box,coil housing, power valve covers, primary& secondary clutches ect. THAT ALSO COULD BE NEGOTIATED.

THIS IS A STEAL OF A LIFETIME.........

IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CALL ME!

(208) 724-7767.

I also would look at separating, let me know what you need...:

 

[Hardass]

I could get the cylinder redone for 165 if you or who ever buys it wants to get it done.

 

[Pwdrhnd]

thanks, will make sure and steer whoever buys your way.........

 

[Pwdrhnd]

all pm's returned .........someone is going to get a deal here.

 

[Pwdrhnd]

to the top

 

[Pwdrhnd]

ttt

 

[Pwdrhnd]

PENDING SALE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[Keith517]

Is this still for sale?

 

[snotoy]

How much for the oil pump let me know thanks.