F/S Billet Replacement Hinges for 2012-2013 Proclimb Procross Side Panels

[axion68]

I made a few replacement hinges for myself and have had enough requests to make a few for sale. New side panels run $250 from Cat, so save some cash and fix your old ones!

Billet 6061 replacement hinge for 2012 and newer Cat (Proclimb, Procross and Procross XF) side panels.




Click thumb for larger image

$25 shipped each (to the US) or 4 for $80 shipped (in the US)

PM me for Canada pricing

PayPal axion68@gmail.com
I can do Visa/MasterCard over the Phone
Call Jacob @ 208-459-0662

 

[axion68]

Install image gallery http://imageshack.us/g/1/9984373/

Tools Required:
Cutoff tool (Dremel, pnuematic cut off tool, etc..)
Drill with 3/16" Drill bit
Rivet gun

Installation is a snap, just take your favorite cutoff tool and remove what is left of the old hinge. Make a nice flat mounting place for the new hinge, making sure not to remove too much material and compromise side panel integrity. Mark position of new hinge, drill a 3/16" hole and rivet hinge in place.

 

[axion68]

ttt

 

[boost4life]

Just ordered some of these side panel tabs. Thanks Jacob. Such a great idea instead of replacing the whole panel and they are probably stronger than the original plastic.

 

[Buckett]

Ordered a couple aluminum tabs from axion68 last week, just waiting for them to arrive. No more zipties for this guy!

 

[calltrex]

Dont got my new machine yet but i thought it would be good to have some on hand for future

Which ones break or whatever?

Is there 1 hinge per panel?

1 side break more then other?

 

[axion68]

Dont got my new machine yet but i thought it would be good to have some on hand for future

Which ones break or whatever?

Is there 1 hinge per panel?

1 side break more then other?

There are 2 hinges per panel. They are all the same hinge.

I just did another run of these and they are ready to ship.

 

[axion68]

I still have a few more left!

 

[axion68]

ttt

 

[axion68]

bump

 

[calltrex]

I bet you would sell a bunch if they were cheaper

 

[pinko]

Still making these?

 

[axion68]

I still have a few left. Pm me.

 

[Gxf800sphc2012]

Could someone post a picture of these in the Forum... cannot access the photos throught the LINK.

 

[drypowder]

I would like to see a pic of these also

 

[axion68]

Here is a link to pictures

The new hinges no longer have sharp edges and have a better surface finish.

https://drive.google.com/open?id=0B8DUXO3wL65hYlNZOW5BRHE0dzQ


Pricing has dropped to $20 shipped to the US for each hinge

Paypal or a credit card over the phone accepted