EZ-Ryde
The new carve is a nice setup.
The benefit of the carve vs. the standard EzRyde is that the whole skid can pivot on the back of the arm. This is nice, because you can keep the sled controllable with added HP, but not lose the friendliness of the sled. I have them on several turboed163 and they will lift the skis about 10" above the snow when climbing (unless you are trying to wheelie by pulling back) when set up properly. The sled feels a lot like it did when the stock skid was in, even tho you have more ski pressure.
On a side note, EzRyde also makes adjustable front mounting plates that allows 1/4" increments. This is a nice feature allowing you to fine tune the skid.
It is a lot smother down the trail as well.
IF you do not have a turbo or BB I would not waste money on an EzRyde, you can get the stock skid to work well with close to stock power.
