extroverts installed into SBA w 146 x 2.5

[PR Performance]

I am trying to get any info on installing the wahl extrovert drivers on my sba driveshaft, once they are pressed on is there enough room to put back in with out taking off the chaincase? also anyone installed the 2.5 camo extreme into this sled. how did it perform and what other things do I need to know. Any help would be appreciated as I leave in a week.

 

[bigchevrolet]

I'm not positive but is there a clearance issue with the drivers and the rails.

 

[MacDo]

I did put antiratchet from SLP

You need to cut the aluminum rails runner to fit it

and yes you need to remove the chaincase because not anough clearence to install the shaft.....

i did cut one side of the sprocket on the outside L to make room for not to remove the chaincase and it still work just fine

the '12 models have the glued chaincase and i am lazy

Marc

 

[bigchevrolet]

How much do you have to cut of the teeth?

 

[PR Performance]

I have gotten mine in now, to get it in without removing chaincase I took a saws all and cut about 1/2" off of each outside tooth on the clutch side. It went in very nicely, only thing is that the 2.5 track makes it tought to slide shaft into chaincase bearing