Extrovert Drivers For Older Yeti Kits
- Thread starter sledhed88
- Start date
I just recently ordered a set from Rmc snow bike https://www.rmcsnowbikes.ca/collect...ppd-extroverted-driver?variant=31188847788170 for my 2016 yeti along with the new 129 camso track and rail extensions. I'm assuming is just as straight forward as changing sled drives with the uniqueness of having to press shafts out on the yeti. (quite simple if you make or purchase a tool)
Any updates on whether or not these drivers fit the 16 yetis?
Hope they work out!
Avid is making an improved extro as well
Avid extroverts work. ??Camso's extrovert hits brake.
Just got my Camso extroverts, I don't think they will work on the 2016 Yeti. The drive axle goes from hex to round about 3/4" too soon on both sides, so only just over half of the driver would be on the hex the rest would be on a round shaft. Might be OK for awhile but probably not good long term. Anyone want to buy some Camso extroverts???
S
sledhed88
Member
you are absolutely correct in this. The driver only remains roughly half in the hex portion. I don’t know how to post pics cause I have a bunch. I also have the 19 brake caliper, they do fit, and they do work well for a limited period. I decided to give it try but I ended up spinning them on the shaft after about 40km of mountain riding. Ended up doing a bike rescue mission and switched back to stock drivers for the time being. So yes they work, but I also would not recommend it
I’d be interested in details on the above mentioned new avid driver
I’d be interested in details on the above mentioned new avid driver
Could you set screw onto the round part of the shaft? or drill a cross hole and bolt that thing on. With half on the hex and half bolted down I would think it would last.
Hi, yes I am in Canada, I can text you some picture of the drivers if you like, I dont know how to post pics on here. I will check on what I paid for the drivers and let you know on price.
P
portgrinder
Well-known member
Call Robbie at Avid. He’ll make you whatever you want and it will show up when he says. He built me a nice set to clear a 3in track with a cooler.
I like supporting the little guys. Not much talent left at Yeti anymore
I like supporting the little guys. Not much talent left at Yeti anymore
So are you guys actually ratcheting the track with out extroverts? or just trying to run loser than spec for efficiency?
Check your pm
Built a mono rail using Robbie's extroverts . Cost a little more but twice as wide and hollowed out for brake.