ES kit for axys
- Thread starter edgey
- Start date
C
Carls Cycle
Basic Member
E-start Kit
The part number for the new Axys Electric Start Kits is 2881243 for the RMK models, and 2880396 if it is the Rush or the Switchback. Retail on both kits is 639.99.
The part number for the new Axys Electric Start Kits is 2881243 for the RMK models, and 2880396 if it is the Rush or the Switchback. Retail on both kits is 639.99.
Last edited:
B
benny7cfan
Member
Good info. I was thinking of pulling the ES from a pro-x and installing on an RMK, both Axys chassis. What are the differences between the two kits? Will my idea work or?
The only difference I can see if the battery box, battery box mounting and the battery heat shield. Dealer sent me an electric start kit for my SKS that was supposed to be on my snowcheck and they ordered the one for a rush. Got it half installed and now I got to wait til Monday to call them back and get the right kit.
will an ES off a 2015 pro fit? Have one for free if I can make it work.
The brackets to mount the motor look different on the AXYS... but the starter motor, shaft and bendix are the same... The clutch has a diff part number.. but that is because the AXYS has a better angle cut on the sheaves... something that can be corrected at the better clutch shops like Cascade or Indy.
Battery box is diff on the AXYS compared to the ProRide... but just get the lightweight one from Rich Racer on the forums here that holds a lighter battery.
As for the solenoid etc... should not be an issue to make it work.
For those thinking of buying a "Take off Kit" remember that a new, Complete, Primary-clutch is included when you buy the kit from Polaris... so a full Take-off kit would only have a value of around $100 -$150 WITH a swap for the ES clutch. (you trade clutches)
It is NOT possible to add a ring gear to a non-ES clutch.
Check out this thread on "Take off" ES kits ... buying and selling information.
http://www.snowest.com/forum/showthread.php?t=349121
Figure 10-20% off that from a discounter .... Sell your stock primary-clutch for $400 while it is still new... and a full ES kit for an AXYS-Mtn sled would only cost you around $115-$175.... Not bad.
.
Battery box is diff on the AXYS compared to the ProRide... but just get the lightweight one from Rich Racer on the forums here that holds a lighter battery.
As for the solenoid etc... should not be an issue to make it work.
For those thinking of buying a "Take off Kit" remember that a new, Complete, Primary-clutch is included when you buy the kit from Polaris... so a full Take-off kit would only have a value of around $100 -$150 WITH a swap for the ES clutch. (you trade clutches)
It is NOT possible to add a ring gear to a non-ES clutch.
Check out this thread on "Take off" ES kits ... buying and selling information.
http://www.snowest.com/forum/showthread.php?t=349121
Figure 10-20% off that from a discounter .... Sell your stock primary-clutch for $400 while it is still new... and a full ES kit for an AXYS-Mtn sled would only cost you around $115-$175.... Not bad.
.
Last edited:
Mountainhorse, I'm interested in a light weight battery box that will hold my Ballistic battery to power the IDD on my AXYS 800. I can't find a Rich Racer unless he is Racer 220???? Can you help me find Rich Racer and the light batt. box you mentioned??? thanks Bob
Looking for a full AXYS RMK take off kit with the ES clutch. If no one has one (in the next day or two) I’ll just order a new kit for the customer. Thanks!
Last edited:
Similar threads
