error 02 M8T How to test Injectors

[Forty2chev]

History:
09 M8T Aerocharger, sunoco 110.
I have had the sled for years and has run great. Just receantly it started running bad. When I start it it bearly runs with a ECU Error Code 02. If any throttal is applied it just dies. 02 is the Injectors error code.

Is there a way to test the injectors?

I have 40 lbs of fuel pressure.

Thanks in advance.

 

[spoon]

What fuel controller?

Unplug piggyback box from stock injectors and plug in as if stock and fire it up to see if problem goes away. Most often I have this with connection or chafed wires to fuel controller, melted wires under pipe on tbodies. Haven't seen a bad injector, a few plugged ones but that won't set codes.

 

[Modedmach1]

Take a 9 volt battery, run 2 wires from it to your injector. If it is working it will click when you hook power to it. To test the harness you will need a noid light, plug the light into the injector plug in then pull the cord. It should flash as you rope it over. Josh