drive shaft for a 06 switchback 600
- Thread starter rmkray
- Start date
The driveshaft itself will fit into the sled... but you will need to swap out the drivers... (you need a press for that) .
Different tracks have differnt driver spacing.
Different tracks have differnt driver spacing.
R
rmkray
Member
MH do you know of anyone puting on a 146 assualt track on a sled that had a 144? The switchback is our spare sled and I wanted something a little more agressive then a series 4 and. You can pick up thouse tracks at a good price. I just need different drivers and maybe an anti-stab kit.
You wouldnt need an anti stab kit... you can run standard drivers on that track from a Dragon RMK/Assault.
the 146 should fit and you should have enough adjustment... If not, running an offset axle and/or 8" idlers
I dont recall how many rows of paddles a 2.52" pitch (your switchback) has on the track and how many a comp track has...
The stock switch runs a 9 tooth driver I believe... the Dragons/Assault RMK's run 8 tooth.
the 146 should fit and you should have enough adjustment... If not, running an offset axle and/or 8" idlers
I dont recall how many rows of paddles a 2.52" pitch (your switchback) has on the track and how many a comp track has...
The stock switch runs a 9 tooth driver I believe... the Dragons/Assault RMK's run 8 tooth.
