Dobeck AFR+ (Gen 4) For 2011-14 Pro RMK

[snow4shover]

Here is a link to a write up about how to tune Dobeck Performance's Gen 4/AFR+ for the Pro RMK. This an AFR Gauge and a Fuel Trimmer.

How to tune AFR+

 

[kostly]

switch points

Great post Dobeck, I have a question what number on the blue yellow to achieve swithpoint of 4800 rpms between green and yellow and same for blue red to achieve switchpoint between
yellow and red at 6900-7100 rpms

 

[snow4shover]

That is really hard to give that RPM turn on point. The Yellow zone transition is controlled by 80% RPM and 20 % Load. The best thing to do is see where Yellow comes in with the Switch Point(Yellow/Blue) setting at 13. Then lower it accordingly. You can do all your adjustments on the fly as well.

I can provide a setting for the red/blue that will tell the red to turn on at 6900-7100 rpm.
6900 - 12.4
7100 - 12.6

Any other questions please let me know.