Decked Drawer system with Marlon sled deck

[tahoelocal]

Has anyone gotten this Drawer system to fit with the Marlon Xplore II sled deck? I'd like to get it done on a RAM 2500.

Drawer System

Looking for the best in truck bed storage? Look no more. The DECKED truck bed Drawer System is the undisputed champion of truck drawers. DECKED Drawers solve the number one problem with your truck: access and organization. Two ultra-rugged, full-bed-length drawers are the ultimate truck bed...

decked.com

 

[MTsled3]

Depends where the legs sit on the deck itself. If they're wider than the narrow part of the bed (between the wheel wells) then you could probably cut some holes in the top of the decked system and get it to work. If they're narrower, it'll interfere with the slide system for the drawers

 

[ratlover]

legs for the deck sit behind the wheel wells so would assume it could work. Would have to cut holes in that top. Looks like its plastic? Unsure the hight of it if it would clear the ramp slot? Also could see it being a real pain to get the deck in and bolted to the bed or strapped in. Weather guard makes the packrat system. It doesn’t have the big plastic top thing so may be easier to install and not have to cut holes in.

 

[PSI 800]

I think DEE ZEE makes something as well

 

[MTsled3]

legs for the deck sit behind the wheel wells so would assume it could work. Would have to cut holes in that top. Looks like its plastic? Unsure the hight of it if it would clear the ramp slot? Also could see it being a real pain to get the deck in and bolted to the bed or strapped in. Weather guard makes the packrat system. It doesn’t have the big plastic top thing so may be easier to install and not have to cut holes in.

Something like this might work a little better. Same thing but without the wall-to-wall flat area you get with the decked system

 

[RBalazs]

I installed my truckboss pull out tray under my Marlon with some creative thinking

 

[tahoelocal]

I got the Decked Drawers to work with the Dura Deck sled deck. They made legs for me a little narrower and it all fits perfect.

 

[calebmmartin]

I got the Decked Drawers to work with the Dura Deck sled deck. They made legs for me a little narrower and it all fits perfect.

Would you be able to share some photos with us? I'm wanting to run a similar system in my truck, thanks.

 

[tahoelocal]

Here you go. The Dura Deck’s ramp assist is right on top of the Decked Drawers. This left 2.75” of space between the sled deck and the bed sides so I used a plastic L bracket to fill up that space and a rubber seal on the cab side to keep most snow out and the little that gets in isn’t a problem since the Decked is water proof. The Decked sits flush against the cab side and I used turn buckles to keep it secure on the tailgate side. The Decked system does need the narrower van top to allow the Dura Deck legs to fit on the side - when I take the Dura Deck off I’ll put back the RAM truck width Decked top. It fits perfect and is a great use of space with the drawers to hold tools, super clamps, truck accessories, etc.