Like it says has anyone fixed or straightened one
right behind the secondary?
right behind the secondary?
creased tunnel
- Thread starter pxmk03
- Start date
Use the search function... PLENTY of discussion with photos in multiple threads.
Search for bukled, creased, bent tunnel etc.
Heres what I found with 5 seconds of search.
http://www.snowest.com/forum/showthread.php?t=355254
http://www.snowest.com/forum/showthread.php?t=353406
http://www.snowest.com/forum/showthread.php?t=347758
.
Search for bukled, creased, bent tunnel etc.
Heres what I found with 5 seconds of search.
http://www.snowest.com/forum/showthread.php?t=355254
http://www.snowest.com/forum/showthread.php?t=353406
http://www.snowest.com/forum/showthread.php?t=347758
.
Thanks Mnthorse didn't think about doing a search
theres a lot more in pics and descriptions of straigtening...
I just did one and used the VanAmburg overlay kit on top to get it back to useable again.
Good luck with the repairs... post up your pics here so we can see your progress!!
.
I just did one and used the VanAmburg overlay kit on top to get it back to useable again.
Good luck with the repairs... post up your pics here so we can see your progress!!
.
We offer laser cut plates as well.
Laser cut. this in fresh off the table. i'll see if i can dig up some pics of installed plates.
not sure what they are coming out with for 15 yet but yes this is a common problem, preventative braces are best and easiest to do. we make a kit at fastrax for $125 that most people can install in under and hour. unfortunately after you bend the tunnel its better to go with the full brace like the one pictured above.
