Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Counsel Wiring, need some answers please.

Upon re-assembly on this Axys I made the mistake of unplugging each of the 3 switches on the counsel.
When I had it all tore apart it became appearent that I could have simply unplugged the main harness to all three.
Well, lesson learned.
Now I don't have another Axys to see which plug belongs to what switch. My pro has a totally different wiring as in the color and number of wires.
Do any of you have quick access to some pics of what switch gets the 5, 3, and 2 wires.
I oddly believe the hand warmer gets the 5 wire as my pro does line up with that.
 
I believe the plot thickens.
So as for the wiring, if anyone runs into this.
I found that the
1. Mode / set = white/brown/white
2. Hand warmers = red/blue - yellow/ red
3. Headlights is the 5 wire bundle.

And my sled will power up the high beams every time I apply throttle.
Even when the switch is on low.
This is a 16 SkS.
Non ele start.
Kinda leaning towards a mag issue. As it appears charging system.
Stock LED's and a SLP single pipe with the resistor installed.
I did remove the resistor with no change.
Any ideas gentlemen?
 
I believe the plot thickens.
So as for the wiring, if anyone runs into this.
I found that the
1. Mode / set = white/brown/white
2. Hand warmers = red/blue - yellow/ red
3. Headlights is the 5 wire bundle.

And my sled will power up the high beams every time I apply throttle.
Even when the switch is on low.
This is a 16 SkS.
Non ele start.
Kinda leaning towards a mag issue. As it appears charging system.
Stock LED's and a SLP single pipe with the resistor installed.
I did remove the resistor with no change.
Any ideas gentlemen?


Your wiring is wrong.

hi/low beam switch has 2 wires.... Red/Blue and Yellow/Red
Mode/set switch has 3 wires..........White/Black, White/Red and Brown
Hand warmers is the one with 5 wires.... You can figure that out with out me listing all the colors :)

Eric
 
Your wiring is wrong.

hi/low beam switch has 2 wires.... Red/Blue and Yellow/Red
Mode/set switch has 3 wires..........White/Black, White/Red and Brown
Hand warmers is the one with 5 wires.... You can figure that out with out me listing all the colors :)

Eric

Eric, your simple info just made my day.
I've had a string of bad luck, so knowing there is no charging issue really makes me feel better.
Thanks
 
This should give you an idea... from wiring diagram.

Heaters Dark blue (HI) and DB/Red (Low)

Mode/set White/black & White/Red

Headlight Red/Blue & Yellow/Red

Thumb warmer: Orange/Green & Gray/White (hi/low)

Brown grounds.

Factory manual does not have diagram for the sub harness/connectors unfortunately... just up to the console main connector.
 
Last edited:
Premium Features



Back
Top