CMXDS (belt drive)

[CRAZY MOUNTAIN XTREME]

We have kits in stock and ready to ship for PRO RMK's
$2550.00 with Wahl Bros Drivers or + $100.00 for Avid Drivers. This system drops and rolls the trackshaft down an inch and back an inch from stock location. You can run a 3" track with 8 tooth drivers with about 1" of clearance. 7 tooth drivers are too small in diameter and cause a huge loss of efficiency. Added bonus...the CMXDS has 4 piston billet machined brake caliper that brakes on the trackshaft. Another bonus is you don't have to butcher your sled to put our kit on, so you can put your stock stuff back on and put the CMXDS on your new PRO next season. Call 406-686-4921 for more details and to order.

 

[mountainhorse]

WOW... that is some beautiful hardware Mark.. nice work.

I like that you've gone to the Avid PC drivers.

Any word if possible to do a non-D&R kit?





.

 

[CRAZY MOUNTAIN XTREME]

WOW... that is some beautiful hardware Mark.. nice work.

I like that you've gone to the Avid PC drivers.

Any word if possible to do a non-D&R kit?





.

We have always offered the Avid drivers. Robbie does a great job.

It would be difficult and very expensive to develop a shorter system. There are really no benefits to doing a shorter system and to counter that there are many benefits to the D&R a few of which I talked about above. If you know of any I would be open to listening to them.

 

[m8magicandmystery]

dang...gorgeous stuff...you guys must sleep sound at night..!!!!

 

[Bushwacker1]

How does the input for the speedometer work with this kit. The old pick up point is on the brake rotor on the jackshaft. Does the gage need to be recalibrated?

 

[CRAZY MOUNTAIN XTREME]

How does the input for the speedometer work with this kit. The old pick up point is on the brake rotor on the jackshaft. Does the gage need to be recalibrated?

We are currently working on a pickup for the speedo for the 13 and 14's.