Clutching ???

[XFIRE800]

I need some advice on what to do for my clutching. 09 crossfire 800 141 slp pipe kit, powerclaw 2.25. Ride 0-7000 ft. and some 6-9000 and weight 170 with no gear. I was looking at torsional kits, but i need to have reverse so those are out. What can i do to improve my clutching? I was thinking shift assist and rollers, either rock or Hi Torque??? Should i change springs or helix, or are those better left alone with my large differences in altitude?

 

[XFIRE800]

no opinions here? not even on which rollers to get?

 

[product tester]

good rollers , 40 helix old style cam conversion kit shift assist about 160. shipped. works great .

 

[XFIRE800]

Thats just the conversion kit from bdx right? Does that affect reverse? I also forgot to add that i will be gearing down to 57/63 from the stock 60/60 will this matter, or will i just have to change the weight in my primary?

 

[Lucky Lyle]

Thats just the conversion kit from bdx right? Does that affect reverse? I also forgot to add that i will be gearing down to 57/63 from the stock 60/60 will this matter, or will i just have to change the weight in my primary?

yes conversion from bdx and helix cut for reverse gearing wont change anything

 

[XFIRE800]

ok will the lower gearing affect anything?

 

[product tester]

gearing wont affect it lower gear better belt life.

 

[XFIRE800]

Thanks for the help, which rollers should i use BDX rock, or Hi Torque. I am not worried about the cost of the rollers as they dont need replacement often. I have searched snowest, and it is pretty much a toss up between the two if bdx has the crumbling issue fixed i will probably just get those bcuz i have to order some stuff from them anyway.

 

[Lucky Lyle]

Thanks for the help, which rollers should i use BDX rock, or Hi Torque. I am not worried about the cost of the rollers as they dont need replacement often. I have searched snowest, and it is pretty much a toss up between the two if bdx has the crumbling issue fixed i will probably just get those bcuz i have to order some stuff from them anyway.

bdx rollers for sure.

 

[Destroyer]

why different rollers. What's wrong with the cat ones?

 

[Bearcat]

Cat ones melt/get flat spots easily. You need to replace 3 rollers only. Stock ones are good enough for backshift rollers. Upshift needs harder ones.