Clutching setup help: Island Park Idaho area

[mickyd32]

Have a trip booked in for mid January to the Island Park Area for mid January, looking for some good clutching setups for this area. I believe its around 6000"?

If any locals could chime in and tell me what they are running it would be greatly appreciated. Looking for setups for:
13 pro 155
12 SB Pro R
10 Dragon 121

possibly also for 11 SBA 144 and a 12 SBA 144

thanks!

 

[Old Scud-doo]

If you are planning on running stock sled and clutching, you would want to run 62g weights. Island Park is actually 6 to 9k+ depending where you ride.

 

[Big D rmk700]

might want to take a little weight off the 62 that come stock. Get them down to around 61 and you will be a lot happier.

 

[mickyd32]

ok so somewhere between 60s and 62s

what about primary springs?

any changes in the secondaries?

how about exhaust valve springs

 

[rick5150]

stock primary...black/purple secondary...60 gram weights

polaris parts and what is in your manual for 8k-10k ft
unless you plan on going to the mountains to not go on the mountain? 6k ft is just where your goto sleep and ride out of

i ran this last year and was literally just searching this last night to double check this is the easiest for outta towners

guys that live here are going to have better options im sure as they can tune and tweak for exactly there riding spots and sled mods

 

[Ex-Flit]

i have been riding there for years and I run 60's in my sled