Clutching help

[flatop600]

Just bought an 09 600 RMK Shift 155. I'm in Michigan. Need recommendation for 0-3000 ft elevation.

Online Parts diagrams show Drive spring 140/330
Driven spring 140/200
weight 10-58

Don't know if previous owner rode it out west, or in Wisconson.... so not sure if it's set up proper for my riding plans.

 

[donbrown]

Just bought an 09 600 RMK Shift 155. I'm in Michigan. Need recommendation for 0-3000 ft elevation.

Online Parts diagrams show Drive spring 140/330
Driven spring 140/200
weight 10-58

Don't know if previous owner rode it out west, or in Wisconson.... so not sure if it's set up proper for my riding plans.

I am sure someone will chime in for specifics. Personally I send my clutched out to get balanced and use two people here on the forum. So yes they will set it up for your elevation and riding specifics.

I don't know them personnaly but their work is very good

INDYDAN and 1200psi are their user names on here.

 

[flatop600]

I am sure someone will chime in for specifics. Personally I send my clutched out to get balanced and use two people here on the forum. So yes they will set it up for your elevation and riding specifics.

I don't know them personnaly but their work is very good

INDYDAN and 1200psi are their user names on here.

I found the parts diagram you reference online...It's shipped from the factory with high elevation set up. I'm at 0-3000ft elevation.

 

[donbrown]

I found the parts diagram you reference online...It's shipped from the factory with high elevation set up. I'm at 0-3000ft elevation.

I am pretty sure you want around 8200 RPMs.

PM DAN and or Brad and they will help you.

 

[NapaMatt]

I do... 10-62 weights

Stock primary spring or slp Blue/ Pink strip Black/ green strip primary spring..

as for the helix.. either a 62-44-42 or a 64-42-36

60-44-.36 Rips also.. what i am running!


And a red/black sec. spring

Shoot ofr 8250 rpms