clutching help push turbo

[Powder Man]

I installed my push turbo last night and I must say it went well and the look and parts to the kit look to be of good quality. The clutching instructions do lack some instructions, as I'm coming off a skidoo rev and I'm not used to the yamaha rivets in the primary. I have a simple question whats the best and simplest way to get them out. I've tried beating on them and that doesn't work. My next step is to take them over to a machine shop to press them out, is this what I need to do or am I missing something? Also how do you tune on these things on the trail if I can't get the rivets out at home?

 

[RXMax]

Get a good set of drill bits. They drill easy. Use a bit almost as big as the recessed side of the rivit and carefully drill until the recessed part is gone then drive the rivit out with a hammer and punch. That is why most go with aftermarket weights like STM or heavy hitters, etc to ease adjustment.

 

[yammi4ever]

grind them off flat and support them well and they will drive out. Careful when grinding as you don't want to get into arms any.