what are you guys running for weights and spring in the UP, im only pulling 8150, should they be a little higher?
clutching for the yoop
- Thread starter prorider10
- Start date
10-64, like the book says.
thats not what my book says
Everything is completly stock with 10 68
Your right on with your set-up. Those are the RPM's your shooting for!
oops, my bad. I have a 600 not an 800
The 800:
0-2000ft ele
Primary:
10-68
Black spring (140/330) 7043342
Driven:
Black spring (155/222) 7043063
The 800:
0-2000ft ele
Primary:
10-68
Black spring (140/330) 7043342
Driven:
Black spring (155/222) 7043063
and 8250 is operating RPM +/- 300. So I think your good bud. 50 RPM ain't gonna do much but if your a perfectionist you can buy aftermarket weights that will get you to exactly 8250 with some fine tuning (drilling out preset holes).
Alright thanks guys, i waa just making sure i was getting the performance i should
picking up a Pro this week, coming off an 09 700 and planning a trip to the UP for one last ride in.
Going to have to get some weights and also wondering if you are running the 10-68's with which springs? the higher elevation springs or swapping for what the books says?
also, what gearing are you guys running? with my 09 i just ran the same 19:42 here and out west, curious if you guys are doing the same for the UP and just swapping out weights/springs.
need to make sure i can track down what I need so I can ride it.
thanks guys
Going to have to get some weights and also wondering if you are running the 10-68's with which springs? the higher elevation springs or swapping for what the books says?
also, what gearing are you guys running? with my 09 i just ran the same 19:42 here and out west, curious if you guys are doing the same for the UP and just swapping out weights/springs.
need to make sure i can track down what I need so I can ride it.
thanks guys
10-68 weiggts on stock motor in Mi. i run 8300.
Sent from my DROID BIONIC using Tapatalk 2
Sent from my DROID BIONIC using Tapatalk 2
