Clutching after the fix question?

[RandyDomit@msn.com]

Hey clutch experts out there...Just finished breaking in the FIX, with a PC5 and Stoutner's 157 hp map. I also am running a carls clutch kit with epi 62 g weights. I am running 4000 to 7000 elevation and hitting 8450 rpm... went into limp mode on me on a climb. need to throw more weight on the clutch obviously. any input would be greatly appreciated

 

[miller tools]

weight

Add two grams and try it

 

[Stewy]

Thats a good sign for sure ! What were you hitting RPM wise before Fix ?

 

[RandyDomit@msn.com]

Before the fix I was hitting about 8150, I realize I need more weight, just a little concerned about the DET light and going into limp mode on me now

 

[augerin]

I am running 68g weights with an 08' head, slp, pc5, and the slp map. Jan 10' flash. Wish I could tell you what spring but its hitting 8150 rpm on the hill.

 

[Stewy]

Before the fix I was hitting about 8150, I realize I need more weight, just a little concerned about the DET light and going into limp mode on me now

That could be that its reving too high. Load it down, add two grams or more helix. My guess is it won't DET after that. If it does you know your dealing with a fueling/mapping issue.