i have a an 07 summitt adrenaline 800 that i recently put new rollers in and the first ride out it wouldnt tach to i moved my clickers to 6 and thats where is decided to tach. i was wonderind if ther is something i can do to make it run on setting 4 so i have a little adjustment when needed. any help would be great!
clickers need some answers!!
- Thread starter helisledder27
- Start date
its still all the stock weights, whatever they come with from the factory but i will get a specific number.
First, make sure all wear parts in both clutches are in perfect condition....bushings, rollers, arm pivots, spring cap bushing etc...
If all is good, take out pin weight. Get down to clicker 3 and the '07 needs to run 83-8400RPM.
There are some better helix choices that will give more RPM and stronger backshift as well.....short of buying a complete clutch setup.
If all is good, take out pin weight. Get down to clicker 3 and the '07 needs to run 83-8400RPM.
There are some better helix choices that will give more RPM and stronger backshift as well.....short of buying a complete clutch setup.
i'll give it a try and let you know how it works. i also dont use and OEM belt but an ultramaxIII would that make a different?
use skidoo belts
Use the skidoo belt they are way better than the ultimaxIII if you want to run that brand you should be running the XS series
the one you have on is quite soft
Use the skidoo belt they are way better than the ultimaxIII if you want to run that brand you should be running the XS series
the one you have on is quite soft
hey just found out it has 26 grams is that to high what should i use?
