Check Engine Light Flashing need help tonight please

[Sledder Jorg]

Pull 2010 600 RMK out of shop to load onto trailer, check engine light flashes is a "3 flash - pause - 4 flash" pattern.

DET??? Book sayd DET would be 6 flashes.

Anyone please!

 

[Sledder Jorg]

Forgot to mention.... leaving tmrw. Just my luck.

 

[retiredpop]

3 flashes: Intake Air Temperature Sensor signal is below 0.19 volts or above 4.9 volts.

Do you have the temperature sensor plugged in on the side of the airbox?

4 flashes: Barometric Pressure Sensor circuit voltage is below 1.25 volts or above 3.23 volts.

This is part of the ECU.

 

[Sledder Jorg]

3 flashes: Intake Air Temperature Sensor signal is below 0.19 volts or above 4.9 volts.

Do you have the temperature sensor plugged in on the side of the airbox?

4 flashes: Barometric Pressure Sensor circuit voltage is below 1.25 volts or above 3.23 volts.

This is part of the ECU.

Temperature senor wasn't plugged in... removed my air box to seal it up better and didn't see the handing plug. Dumb move on my end. You sure know your stuff !! Sled is loaded & ready for the weekend. Thank you