Catalyst elevate
- Thread starter Krause09
- Start date
On my 165, it definitely looks like it needs to be higher in the front as all the weight is on the center arm and the rear is off the ground. You dont notice it on a 54 like the 165.
We ran a riot front end on one last year and it worked well until the a arms mount ripped off the frame.
We ran a riot front end on one last year and it worked well until the a arms mount ripped off the frame.
Wonder if it's a twin rail
A sled that balances on the center arm area is usually the most playful. When you raise the front too far and take all of that out it can make the sled feel more planted than it was before. Hopefully they have something figured out with the skid to match lifting the front so it keeps the handling balanced. They had the twin rail setup dialed, but it was a mixed bag on the Alpha.
Lower rise then the Ascender Alpha spindles. I think that will be better. I wasn't the biggest fan of the Ascender Alpha elevate spindles; others love them. Now the full Elevate setup on a twin rail Ascender that is awesome, easily my all time favorite mod! Hopefully Iceage nailed it with the Catalyst geometry.
Last edited:
I'm guessing the lower rise is due to the Catalyst spindle already being taller than the Ascender.
S
SKIDOO EXPERT
Member
A little late to this thread but here's the YouTube video for the elevate spindles for catalyst.
Z
Zbroz Racing
Well-known member
Agree rasing CG just at the front will fill like pullin the limiter in slightly.