i have a 04 edge with a carls cycle 910 in it. does anyone know what carls use for a case on them. is it a stock 800 case with a big bearing kit or do they use something eles. my end goal is to go back to stock with it. either whole new engine or maybe just new jugs and head an so on thats if the case is an 800 case. i pick up the sled with the intant of reselling it, but not working out so good for me. so now i thinking about just puting it back to a stock 800 because the chasie is in realy good shape and it allso has some other goodies on it. any info would be great thanks for your help.
carls 910
- Thread starter clintfeight
- Start date
Are you looking to trade for a stock 800 motor?
ya maybe from what im told just the eng is woth about 1500 the problem is if i do go back to stock i need everything pipes electronics pto clutch carbs and i think that is all i would need to do the eng swap. But it wont be till after 18th of febuary because im going to island park and i dont what to be out a sled but i do want to get rid of it race fuel is expnsive
Don't think you can go back to stock. The cases are heavly ported and clearanced for the bigger pistons. As far as the crank it won't have a big bearing kit unless the previous owner pulled the motor down and sent the crank off. Think your best bet is to find a whole motor. If you are interested in piecing one together pm me I have an 03 case and electronics for it. If the fuel is the problem you might be able to call Carls or RK TEK and have a lower compression head built and run a single pipe on it.
Last edited:
im not realy good with the motor work itself if i can i would like to get one that is complete and ready to bolt in. but i need to sell the carls motor first but that does make sence that i cant use the old case thank you for the info at least i know now what i need to find a complete motor.
here are a few pic of what i got
X
X2Freeride
Well-known member
I have a stock 03 800 thats in great shape as well Id be willing to trade. if you have the space id even come do the swap.
Last edited:
hey clintfeight,
Could you take a picture of the coolant bottle and how it levels up with head cover? Also do you know if you have a thermostate in that motor?
I am trying to solve an high temp issue i'm having, I don't want to jack the thread just saw this and would like to see how they line up!
Cheers!
Could you take a picture of the coolant bottle and how it levels up with head cover? Also do you know if you have a thermostate in that motor?
I am trying to solve an high temp issue i'm having, I don't want to jack the thread just saw this and would like to see how they line up!
Cheers!
