Carbides that fit Ski-doo 1999-2001 and maybe others, $30 shipped:
Overview of Roetin Performance X-10 Two Carbide Wear Rods - X102444
•Six inches of 90º carbide on 7/16 in. bar
•Two carbide wear pads
NOTE: Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.
Dimensions:
Length/Diameter: 20-1/4 in./7/16 in.
Stud Diameter/Length: First Stud (not threaded): 7/16 in./1 in.; Second to Fifth Stud: 3/8 in./2 in.
Number of Studs: 5
Stud Center Mounting Distance From:
Front to 1st: 1st stud on end
1st to 2nd: 2-1/4 in.
2nd to 3rd: 4 in.
3rd to 4th: 7-1/2 in.
4th to 5th: 4 in.
5th to End: 2-1/2
--------------------------------------------------------------------------------
Specs
Bar Diameter
7/16 in.
Degree of Carbide
90 Degree
Length of Carbide
6 in.
Stud Diameter
3/8 in.
Wear Rod - Carbide
Weight
2.56 lbs
Overview of Roetin Performance X-10 Two Carbide Wear Rods - X102444
•Six inches of 90º carbide on 7/16 in. bar
•Two carbide wear pads
NOTE: Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.
Dimensions:
Length/Diameter: 20-1/4 in./7/16 in.
Stud Diameter/Length: First Stud (not threaded): 7/16 in./1 in.; Second to Fifth Stud: 3/8 in./2 in.
Number of Studs: 5
Stud Center Mounting Distance From:
Front to 1st: 1st stud on end
1st to 2nd: 2-1/4 in.
2nd to 3rd: 4 in.
3rd to 4th: 7-1/2 in.
4th to 5th: 4 in.
5th to End: 2-1/2
--------------------------------------------------------------------------------
Specs
Bar Diameter
7/16 in.
Degree of Carbide
90 Degree
Length of Carbide
6 in.
Stud Diameter
3/8 in.
Wear Rod - Carbide
Weight
2.56 lbs
Last edited:
