I need some rsi or fly style handlebar risers for 1 1/8" bars. The shortest one riser rsi makes is 1 1/2" and I need some that are like 1/4" or 1/2". I'm starting to get into freestyle and an 1 1/2" or 2" riser is just too tall on my IQr because the steering post is so high. Any help is appreciated. Thanks, Mason
Can anyone make me custom length bar risers?
- Thread starter mlmm
- Start date
Buy taller boots shorty. J/K
Risers are measured center-to-center, and it's about impossible to make them any shorter. There's only 1/2" of material between the post tube and the bars on a 1 1/2" riser.
7/8" / 2 = 7/16"
1 1/8" / 2 = 9/16"
Risers are measured center-to-center, and it's about impossible to make them any shorter. There's only 1/2" of material between the post tube and the bars on a 1 1/2" riser.
7/8" / 2 = 7/16"
1 1/8" / 2 = 9/16"
Buy a 3"riser and mount your bars upside down and backwards, Voila!
It looks like I'm going to end with the 1 1/2s and hope I can get my boots through the bars when I'm 30ft in the air. If not Ill have to look into getting a 600rs over the summer.
8
80 ponies
Member
Thanks but i found a set of 1" from a fellow IQr freestyle guy.
