Boondocker vs Boss noss for 1m900

[HANDSOME]

I have never had anything to do with NOS but I want to get a kit for my 900. I am looking into some used kits and all I have found is the Boss kits. I think a dry 50 hp shot would be lots. What do you guys recommend ?

 

[Perk]

I have run several systems. Was not happy with any of them. Bought the Boondocker kit with the synergy regulator and I love it. Always there 100% when I hit the button. Been running it for 4 years, not one issue. I highly recommend it.

 

[HANDSOME]

Was there much tuning involved with your kit ?

 

[Rixster]

The new boss system is install and go. No tuning at all. just a 60 hp light switch! It is simple, clean and flat out works.

 

[HANDSOME]

I cant wait to try one on my 03 1m 900. I am going to get a refill station as well. AND a go pro helmet cam !

 

[Killa900_1m]

does using "noss" take life off the motor? or is it good reliable power.....

 

[Catkidd67]

I been running and racing the Boondocker for 4 yrs now, And have not burned my sled down, really no problems to speack of. Wish i got bigger spray nozzels though. it really simple to dial in, and it dumps fuel in as well as the NOS, so it pretty safe on the motor. It dont help with the extra 4LBS, but really caint tell the wieght difference. But I also running 2 1/2x 16x162 track so it robs a bit of horse power. Grass drags it was awsome, hill cross races worked great at the hill towards the finish. DO NOT HIT THE BUTTON when in the portion of the snow cross part of the hill cross race though

 

[HANDSOME]

Just tried my new boss kit yesterday and it worked great. It has 2 30 hp jets which make me think its a 60hp shot. It doesnt feel like 60hp but I may have too hi expectations.

 

[mattymac]

boss noss 2 bottle system is probably the safest system out there IMO.

 

[maddogwfo]

Any Ideas

I have a orginal BoonDocker NOS kit that I ran on my 1M, it worked great for several years but the last two seasons I ran it on my 9001M problems, I installed it on my Mod KingCat last season and have the same issues. it works great in the shop and at a idle out on the Mtn. but when I hit the button on a climb nothing, I have cleaned the in line filter, and no the bottle is not freezing. I am running a mesh hood with a after market small light and a LED rear tailight, I am wondering if I am not creating enough voltage under a load, please help it has been a frustrated couple of seasons trying to get the Happy Button to work, MADDOGWFO

 

[HANDSOME]

Try a new nos filter my buddy had the same symptoms .

 

[maddogwfo]

Thanks

Thanks HANDSOME, I will give BoonDocker a call and try a new filter, we need more snow here in the northwest MADDOGWFO

 

[HANDSOME]

No problem , we need more snow here too.