boondocker troubles with fuel maping

[Apex boondocker]

I am in elavation 2200 feet above sea level... i have the stock settings for the boondocker progamer ... but as soon as i go up in elavation it runs like **** .. I don't know enough about the fuel settings to set them ... does anybody have and setttings that might work?.... or for any other elavations?... I bought the sled used and they sales man told me the head was shimmed ... so can i run higher booost on that? Any suggestions would be great ... thanks...

 

[fastgas]

For low elevation settings I suggest you talk to Reid at Boondocker Canada:877-449-2699. Also there might be newer programming available for your box.

 

[Ultralord]

If I was you I would get that thing off your sled and install a rb3 box best thing I have ever done.

 

[EZmoney]

You can send your BD box in and get the update. From what ive heard the new box is much easier to tune than the old one.But i dont know that first hand,its just what ive heard. You can try a rb3 like ultra said but im not into screwing around with a lap top on the hill,seeing no one has a good clean map for us guys with the Bd kit.My advice to you is to to give Travis a call at Ogden Vally and get a Pure Logic box.There simple to tune with.Where you will find the older BD box a pain in the a... The one guy on here that seems to know his stuff with the BD box is JSCC on the forums if you pm him im sure he will help ya or give Reid a call .You will be out having fun right away with a Pure Logic IMO.

 

[Ultralord]

the pl box is a big improvement from the boondocker But if you get the rb3 it will have a working map in it and then you can upload new maps with a pda works great super easy.

I have had all 3 and the rb3 is the only one I dont have to doink with