boondocker box info

[fatboyab]

I had a dealer install my boondocker box. It has a pto injector fault as soon as you start the sled. It looks to me like the pins in the black box that you connect to the injector on that side have been installed backwards. Is it possible to push them back out again and change them over or do I have to cut the wires and rewire that side. Any help would be appreciated.

 

[Seeyacop]

Yah you should be able to push the pins back out and reinstall. You should also look at the boondocker wesbite and download the instructions for the box install and check to make sure it is hooked up right for the year of sled you have.

 

[ddy58]

It will also do that if you dont have a good ground

 

[mtn_extreme]

agreed, check your ground.

 

[fatboyab]

I checked the wiring diagram on boondockers and it is backwards. Is it possible to get the wires back out of the connector or do they lock into place when you put them in.

 

[West Coast Sleds]

Yes

On the M series boxes you have to switch soe injector wires, But why do we have to do this for $400.00 ?????
CANT BD FIGURE OUT THERE DAM CONTROLLERS????