bikeman pipe mod

[sledneck_03]

anyone have this done to their sleds? more so on a 700.... but anyfeed back will be great. Thinking of doing this and getting their quiet can and a slp air horn to prep it up a bit

 

[catothom]

Wonder about the same. I see all are doing the SLP mod with power commander on their sled, but no one has said anything about the Bikeman Performance.
I see they have a performer kit with pipe, clutching, reeds and more, but how does it perform?

 

[sledneck_03]

here is a dyno

 

[fat_joe95]

anyone have this done to their sleds? more so on a 700.... but anyfeed back will be great. Thinking of doing this and getting their quiet can and a slp air horn to prep it up a bit

The pipe mod from bikeman works really well with the stock head but once you add the bikeman head it runs but tuning is a b*tch and wants to go to deto mode all the time and think it was the pipe was to tight for the head bc I could richen it up till the plugs were dark and it still went into limp dick mode and my buddy had the same issue on his if you are riding 6000 ft and above I prefer bikemans high head that's on the 800 cfi dragon

 

[R44guy]

The BMP Polaris pipe mod makes a huge performance gain on both the 700 & 800 CFI motors and even better with a power commander with a good fuel map. Jim with dynotech has shown huge improvements with this on the dyno besides my dyno sessions as I have previously posted here on the SW 4M.