What would be the best looking windshield to go with defrost bag part #2879090.
And how do you guys like this bag?
Thanks in Advance!
And how do you guys like this bag?
Thanks in Advance!
Best windshield to go with Pro-Ride defrost bag?
- Thread starter Mr. Pump Gas
- Start date
I have the stock flat black mid windshield.
I really like the defroster bag. The guage location is great. The only thing I don't like is how the ignition key sticks up. I used a knock out hole plug (for filling empty holes in electrical switch and junction boxes) and plugged the hole. Cut the hole in the bag and put the key inside the bag in the stock location.
It will keep your stuff nice and warm as long as you don't cram it full. You can easily carry a pair of gloves, a hat, and a pair of goggles in there.
I was a little concerned about the guage when rolling the sled over, but the bars really take most of the force if there is any.
I really like the defroster bag. The guage location is great. The only thing I don't like is how the ignition key sticks up. I used a knock out hole plug (for filling empty holes in electrical switch and junction boxes) and plugged the hole. Cut the hole in the bag and put the key inside the bag in the stock location.
It will keep your stuff nice and warm as long as you don't cram it full. You can easily carry a pair of gloves, a hat, and a pair of goggles in there.
I was a little concerned about the guage when rolling the sled over, but the bars really take most of the force if there is any.
Does anyone know if the Burandt windshield will work? I like matte black when new but after one day in the trees it shows all tree branch marks
I think the bag will stick up a little higher than the Burandt windsheild. I think a buddy of mine tested it. The branch marks are just battle scars to me. I guess I do like my sled to look nice, but at the same time I have no problem blasting through trees and scratching it up.
They make a low profile defrost bag that doesn't relocate the key, it would probably work with the burandt windsheild. The standard one will sit higher.
.....I sure love mine.....but some don't care for the gauge angle?Use WD-40 and a rag on those scratches. They be gone!
I love my defrost bag. I use it with the Polaris mid windshield. I also added a 12volt fan to blow hot air through the bag. It really heats up the gloves and dries/defrosts everything in a hurry. Nothing better than pulling toasty warm gloves out of it that were wet and dry and hour earlier. May also added extra venting to the engine bay, but mainly added the fan for the heat and drying in the defrost bag.
