Bender pipes on a MM700

[Maxitout24]

I have a Set of Bender pipes that I want to put on my 97 MM 700. I run a Holzman variflow and was wondering where to start jetting I have 142.5 main jets and 45 pilots. Do those pipes run on the rich side or lean side? Also where to start for clutching I tried to get in contact with Bender to get tuning specs but was unsucessful. Thanks alot to anyone that could help out.

 

[Scott1]

Jetting

I run 146.3 mains
needle 3rd position
55 pilot
fuel screw 1 3/4

I run Bender triples, v force 3 reeds, and kickass pod filters.

 

[Scott1]

jets

Oh yea at about 4500 feet

 

[M.M. 700]

Contact Mountain Performance. And see if they still have the jetting/clutching set up. I got the spec sheet a few years ago from them for the Bender Triples on a 700 triple.

Or PM me and I will look to see if I still have my sheet.

 

[Maxitout24]

Bender pipes

Thanks alot mm 700 Ill try to get ahold of mountain performance if not I might pm you thanks again!!

 

[Ford428CJ]

You will love those pipes! I do.... Sorry that I cant tell ya what I'm running for jets. I bought the sled that way....

 

[M.M. 700]

If Mountain Performance doesn't have what you need. Or even call Tom at http://www.hartmaninc.com/ first. He will set you up right, might want to ask him about clutching too.