My buddy has a 12 pro with a 2013 update on the top end with a intercooled boondocker turbo and it would bog at low rpm's but if we eased into the the throttle and got to higher rpm's it would run smoother but can't figure out the fuel mapping cruising through powder field and almost put him over the handle bars said it felt like a bulldozer going through the snow any suggestions or answers to our problem? Thanks.
BD turbo tuning problems
- Thread starter SLDNCK
- Start date
T
theshadowrider
Well-known member
Sounds like you may have a couple of issues. First, if you are having problems in the powder, and not on the trail, you are probably sucking either snow or steam. One thing that is often over looked is how much snow is getting through your vents. I recommend frog skins. Don't start tuning until you are positive you are not getting any snow in. If not you will just be chasing your tail. Remember snow hitting your pipe creates steam and if you ingest that into you intake it will make it act like its pig rich.
turbo bog
Have the same set up 2013 cyl on 2012 bottom end if thats what you are talking about with 2013 update. make sure your ecu is flashed for 2013 programming is different
Have the same set up 2013 cyl on 2012 bottom end if thats what you are talking about with 2013 update. make sure your ecu is flashed for 2013 programming is different
Similar threads
