BD Turbo Exhaust Springs.

[pernikm]

BD wants 9 bucks a piece for their exhaust springs. One of mine broke after 2 rides. I bet they will warrantee, but I would want some spares...Has anyone figured out an angle to get the same thing for what they are worth...like a buck?

Karl

 

[MCIVER]

they will keep breaking on you unless you bend the spring tabs on the Y-pipe out a bit. the problems thats happening is the springs are touching the spring tabs on the y-pipe and it causes them to break. also put a little high temp silicone on them. you should be able to see some rub marks where the springs have been touching the tabs.

 

[glassman]

Yea, i bought a dozen and only put 3 on to try them...Guess which 3 broke first! Back to the stockers.

 

[colorado logger]

Turbo springs

I broke two springs on my very first ride. I put two ribbons of silicon on each spring. Also I installed two hold down springs on the rubber block. Have not broke a spring since.

 

[pernikm]

yup, already done folks! I was just trying to find the cheaper alternative to the bd springs.

 

[Best Place Boost]

I have been having the best luck with the stock arctic springs and ones from ace hardware, I mix and match every other one starting with stock arctics on the bottom of each side.

 

[ESCAPE TIME]

I use the springs from ski doo they are the same as the ones from BD and they are three bucks each.These are the one for the "y" pipe,but the stock AC ones will also work.

 

[mmsports]

Turbo springs

We have them for 5.00 the short ones or last years long ones.