Axys Overstructure

[Dpoole]

My parts are here and I am ready. I am tasked with replacing my entire over structure for the 2016 Axys Assault RMK. Any tips, advice, previous experience, past stories are much welcome! Also if you could, or have any pictures regarding stock runs of fuel lines, wiring, organization etc that would be great! Really any shot under the hood at this point would be help full. Especially with the top panel off! Thanks again!

 

[xpspenziv]

Are you replacing the front structure or both? I have a brand new still in bubble wrap rear upper for sale. Ill get ya pics today.

 

[Dpoole]

Rear over-structure, I foresee it being a real pleasure to replace.

 

[SRXSRULE]

Its just nuts and bolts. You can tear these sleds down to a bare chassis pretty quick. Take pictures as you come apart if your worried about going back together. Eric

 

[Dpoole]

Unfortunately that didn't happen. Attempting to locate documentation now. I'd like to make sure that everything gets replaced/staged properly. To many hands in the pot you could say. Thanks again! Again any pictures or documentation that you fella's might have would be great.

 

[Polaris Pilot]

The important thing is don't miss any nuts, bolts, or rivets. You can easily do a better job routing, securing, and protecting the electrical and hoses than Polaris did originally. Sorry no pictures.

What might help are the part diagrams available online from multiple sources.