Axys holding rpm

[revrider07]

So who has 500 miles and no rpm loss?

 

[TRS]

So who has 500 miles and no rpm loss?

.....me
Hope that doesn’t change

 

[KStrand]

800 miles no rpm problems
2016 sc 163 with original map and motor mounts

 

[TRS]

Some rpm issues are caused by the roller eating into the spider after the spacer/washer wears through. Check your rollers for part #7

 

[sumtinwong]

im boosted but no rpm fade and over 500 miles but I did do a lot of fix-it's at 0-100 miles

 

[Sheetmetalfab]

So who has 500 miles and no rpm loss?

1050 on my sc 2016.

No rpm issues.

 

[Zanne81]

2000 miles on -16 155 pro rmk and still holding rpms

 

[Sage Crusher]

1700 on my boosted Axys- No issues
As TRS said- watch them roller washers- replaced 2 sleds 12 washers today- and motor mounts were good on these with 700 miles on them.

 

[M8onEdge]

'16 Axys 162 and 1,150 miles and no rpm issues. Fingers crossed. Brother hasn't been nearly as lucky. It would be nice if the manufacturers would take a more proactive stance not only fixing issues like this but communicating their technical information to dealers. They must know something more than has been shared. I appreciated what Doo did for the belt issues when they posted information on forums like this. Standing behind your product builds loyal consumers but it's also the right thing to do.

 

[revrider07]

This tried and true clutch has stood the test of time. The parts in it need to be top quality. Having the oil tank above them doesn't help. Have seen guys having belt issue with leaking oil tank and then blame sled.