Axys Gearing

[MSTRAYER]

Has anyone played with gearing up the new axys with the 3" and chaincase, I feel like its geared a little low and there may be room to go up.

 

[d8grandpa]

Why do you think it is geared to low? Under certain conditions?

 

[TreeThrasher]

As mine has run better and better i have been thinking it could use a little more gear to pull against as well...Ill try to get it tested in the next few days and let you know.

 

[Pine-sol]

I've taken mine from the 2.52 to 2.33. Works well.


Sent from my iPhone using Tapatalk

 

[kmo]

Has anyone played with gearing up the new axys with the 3" and chaincase, I feel like its geared a little low and there may be room to go up.

Yes, I tried it. I have a TKI belt drive and the owner of TKI provided several top gear's for me to experiment as I also felt it might be geared too low. I actually lost track speed by gearing up so I went back to the factory gearing. I had another sled I was using as a constant for my testing that helped a lot. Not only does the factory gearing allow me to hold track speed and RPM, I often gain track speed on longer climbs as well as actual ground speed.

 

[TreeThrasher]

155 or 163??

What did it do better do you feel like?

 

[kmo]

155 or 163??

What did it do better do you feel like?

163.

 

[Teth-Air]

When you re-gear too much, you will need to change helix angle to load the motor more or less depending on the direction of the gearing.