Assault spare belt holder

[assault987]

Where is the best place to carry a spare belt? Back Pack?

 

[icr]

in the spare belt holder.

 

[AKSNOWRIDER]

and if you want to take 2 spares..zip tie the other one right to the tube over the exhaust...just cut the ties when you need it...

 

[WyoPro]

in the spare belt holder.

Haha...I really hope he was talking about a place for a 2nd...

 

[R44guy]

in the spare belt holder.

Well where is it then? Location, Location, Location!

 

[RMKRAZIE]

under the hood on the left side right above the oil tank..

 

[crf118r]

Owner's manual shows a pic.

 

[assault987]

was asking if anyone else has tried putting it somewhere other then the holder since it want to pust the side pannel out. thanks for your input...

 

[Ski-Dont89]

fits just right in the polaris shovel (tunnel) bag

 

[bown6]

I put mine under the clutch and zip tied it to the upright tube by your left foot worked good. Need to fold in half and zip it together.

 

[OnlyPolaris]

was asking if anyone else has tried putting it somewhere other then the holder since it want to pust the side pannel out. thanks for your input...

make sure that once the belt is in the holder you put each end behind the little tabs that stick down off the hood. Then the belt won't push on the side panel. Also zip tie each end of the belt before you put it in the holder.

 

[assault82]

I zip tied both ends on mine too and put up in the belt holder. It stopped pushing the panel out. It works.

 

[2blade]

belt holder

I have 1300 miles on my sled with the spare belt in the holder. Now the center hood section is sagging downward from the weight of the belt. Because of the sag the side panel fits poorly.