Aro suspension mounting points

[eric82930]

Can anyone with an aro measure the hole locations for the 2 rear arms for me? Measure back from the center of the driver axle on the right side. Thanks in advance. I have another franken kit brewing and want to make the side panels fit both riot and aro skids for future back to back testing options.

 

[suva]

About 10 3/8" and 30 11/16. I put a straight edge between the drive axle and rear mount and the front arm mount sat about 1 1/4" above it.

 

[eric82930]

Awesome thanks for checking the height too. Do the wheels on the front arm have constant contact with the track or are they just rub protectors? The riot doesn't have wheels on the front arm and it is only 3/8" above the center line. The front distance is the same but the rear shock mounts 5" farther forward than the aro.

 

[suva]

They're in constant contact with the track. It's an '18 model if it matters.