G
This is an 07 M1000 - M Series - 162 Chassis with 09 board update + snow eliminater inserts. Comes as pictured with coolers, oil bottle (was going to remove - but first bolt I tried was turning nut in bottle - so I left it), and some steering components. I will be removing the front motor mount. The front end looked good (sled wasn't wrecked) before dismantling and I took some measurements to verify this; from the spindles too points back on the tunnel I ascertained both were within 1/8" - so bulkhead/flying nun are good. Looking to get $500. I would prefer local pickup - but I don't mind shipping - but it will be costly. I am not on here much - so best to email me at Gcbonesok@gmail.com - Thanks - Greg
![P2050007.jpg P2050007.jpg](https://www.snowest.com/forum/data/attachments/216/216813-08ab8c7a44a05fa1fed3aa81e1dc7e67.jpg)
![P2050012.jpg P2050012.jpg](https://www.snowest.com/forum/data/attachments/216/216771-30f359b7db06cc3e0eccd8e952f059f2.jpg)
![P2050010.jpg P2050010.jpg](https://www.snowest.com/forum/data/attachments/216/216775-dc7e0df7267d9f7f9f8713c8742b4c59.jpg)
![P2050002.jpg P2050002.jpg](https://www.snowest.com/forum/data/attachments/216/216784-c098816d8da794388fd862a7a6ca2414.jpg)
![P2050004.jpg P2050004.jpg](https://www.snowest.com/forum/data/attachments/216/216795-40b0382fb3c131930c2aacad4f251a54.jpg)
![P2050008.jpg P2050008.jpg](https://www.snowest.com/forum/data/attachments/216/216805-54c49f6f4d3a19b1c8c15506af37fe08.jpg)
![P2050007.jpg P2050007.jpg](https://www.snowest.com/forum/data/attachments/216/216813-08ab8c7a44a05fa1fed3aa81e1dc7e67.jpg)