C
AR-15/4 place open aluminum trailer/Cash for ur enclosed trailer
**You need to have a CO DL, 21 years old, and complete a bill of sale for this deal. Bonus- if you have a CCW.
Here is what I have-
I have a AR-15 5.56/.233 1/9 twist 16” barrel
Cash to make up the difference for your trailer
And my trailer listed below
I am looking for-
Aluminum 4 place enclosed trailer
Has to have a heater already installed
It needs to be at least 20’+ 8.5’ inside,and 6'+ tall inside
Not a goose neck
Perks- if your trailer holds gas, has an electric jack, or a place for a generator
Here is my trailer-
It’s a Sledbed made by Newmans Inc http://www.newmansinc.com/trailers.html
The square part of the trailer is 20’X8.5’ (without the nose)
Drive on/drive off trailer. Front ramps act as slush guards. Back ramp tucks in the back.
It has brand new ¾ treated deck (this fall). Have receipt from Lowes.
It has brand new electric breaks- 2 pairs (this fall). Have receipt from local auto shop.
Let me make this clearer, the whole break housing and magnets are new, not just the pads.
Both front ramps have new piano hinges, welding done right by Cooks Welding in Silverthorne CO.
It has tires that were put on last year. Bearings are also good. Spare tire attached underneath.
Jack with a wheel on the bottom that’s removable
8 track grips that the sled park on for traction when taking off (not installed yet when pic taken)
Ski runners/guides (not installed yet when pic taken)
Wood was treated before the runners and grips were put on.
No electric issues, lights are all fine
4 tie downs, the big ones
2”ball, Round 7 way plug, Clear title
It holds four 162” sleds without a problem.
Email me with pictures of your trailer at uready2@yahoo.com
I'll email you pictures back of my trailer
Thanks Ross
**You need to have a CO DL, 21 years old, and complete a bill of sale for this deal. Bonus- if you have a CCW.
Here is what I have-
I have a AR-15 5.56/.233 1/9 twist 16” barrel
Cash to make up the difference for your trailer
And my trailer listed below
I am looking for-
Aluminum 4 place enclosed trailer
Has to have a heater already installed
It needs to be at least 20’+ 8.5’ inside,and 6'+ tall inside
Not a goose neck
Perks- if your trailer holds gas, has an electric jack, or a place for a generator
Here is my trailer-
It’s a Sledbed made by Newmans Inc http://www.newmansinc.com/trailers.html
The square part of the trailer is 20’X8.5’ (without the nose)
Drive on/drive off trailer. Front ramps act as slush guards. Back ramp tucks in the back.
It has brand new ¾ treated deck (this fall). Have receipt from Lowes.
It has brand new electric breaks- 2 pairs (this fall). Have receipt from local auto shop.
Let me make this clearer, the whole break housing and magnets are new, not just the pads.
Both front ramps have new piano hinges, welding done right by Cooks Welding in Silverthorne CO.
It has tires that were put on last year. Bearings are also good. Spare tire attached underneath.
Jack with a wheel on the bottom that’s removable
8 track grips that the sled park on for traction when taking off (not installed yet when pic taken)
Ski runners/guides (not installed yet when pic taken)
Wood was treated before the runners and grips were put on.
No electric issues, lights are all fine
4 tie downs, the big ones
2”ball, Round 7 way plug, Clear title
It holds four 162” sleds without a problem.
Email me with pictures of your trailer at uready2@yahoo.com
I'll email you pictures back of my trailer
Thanks Ross