Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

anyone run a mpi supercharger w meth injection

Is it hard to set up? I'm getting ready to spend alot of cash on my race fuel for the year. I'm looking to run around 12-15 #s around 4500ft. I had considered w/m. I was told I could run 17 #s at sea level, on pump gas with w/m but that sounds like bad news to me.....Oh ya I ride a nytro s/c not shimed. Thanks id86.
 
ID: Not hard to set up. You should have no problem running around 12-15# with meth and 91 octane. PM me your info and Ill get you some information and pricing.
 
Thanks for the info guys. I understand how the meth works etc.I have never looked at one. Would just like to know on how the kit is tuned for the injection ratio for a safe mix.
 
Last edited:
You have a controller and you can adjust the amount of meth injected per pound of boost sensed.
 
Meth Install

I found the hardest thing to installing the kit on my Nytro was finding a place for the tank. I ended up using a coolant overflow container from a Rhino, and mounted it just above the secondary clutch. Remember to plumb it in so your pump gets meth on the flats and when climbing. I run 17# with a head shim at 5000', in a day I consume about 2L of meth (-40 windshield washer fluid).
 
could you explain how the meth makes it so you can run more boost with pump gas and no head shim plz? i dont understand how that works
 
Premium Features



Back
Top