Another Wrapped up ArcticFX Pro

[S.Diddy]

Well my pro is mostly done. Just wanted to post up some pics and say thanks to a few companies that have helped me out HUGE so far.

Thanks a million to:

ArcticFX - Arcticfx.com

Triple-S Polaris - ssspolaris.com

Fox Racing Shox - foxracingshox.com

C&A Pro Skis - caproskis.net

Utah Powder Coatings - utahpowdercoatings.com

Irate Inc. - irateinc.com

Pow Gloves - powgloves.com

 

[Kestrel2126]

Sick sled! Real nice job with the Powder Coating. Pretty wild wrap, Jordan hooked mine up as well.
[FONT=&quot][FONT=&quot]http://www.snowestonline.com/forum/showthread.php?t=253903[/FONT][/FONT]

 

[AndrettiDog]

Looks really cool! I thought I needed to adjust my laptop colors at first.

What's up with the C&A on a mountain sled? Does that work?

 

[S.Diddy]

Looks really cool! I thought I needed to adjust my laptop colors at first.

What's up with the C&A on a mountain sled? Does that work?

Yeah the C&A's work great. I have a couple sets, the XT's (standard in snocross) thats whats pictured on my sled. Also I have a set of their new MTX mountain skis. The MTX's are super wide and increase your stance a little so they are on my spare sled that my GF rides because they float really well for her and don't spear into the snow at all in harsh g-outs. Both sets are amazing though and I really like the control they give you.

 

[skyler.hager]

JEEZ thats a bright wrap!! Arctic FX makes some good looking (hard to miss) wraps... I like it

 

[ringquist]

Thats the sickest wrap I've seen to date!! What bars are those, I thought stock was silver.

 

[S.Diddy]

Thats the sickest wrap I've seen to date!! What bars are those, I thought stock was silver.

Thanks man. Yeah those are the SE KLX110 bend. They are a hair wider and about 1.25" lower near the cross brace tapering to about .75 lower at the ends.

 

[MN 660]

BARS

Like those bars! Do you have a web site and part number? Do you need a different mounting kit or will stock work?

thanks

 

[S.Diddy]

Like those bars! Do you have a web site and part number? Do you need a different mounting kit or will stock work?

thanks

Stock mounting kit bolts right up.
Here's a link to pro tapers site so you know which one to look for:

http://www.protaper.com/products/handlebars/se

The bars are the last one on the page "KLX 110/DRZ 110"

Just a note for anyone installing these. You do not have the ability to use the mountain strap like the oem polaris pro tapers, as there are no bolt holes on the cross brace. Also the bars come standard 800mm wide (about 31.5 inches) I cut mine down to about 29 inches which is still wider than stock. Nice for jumping but not nice for installing the stock bar ends. They taper the inner tubing so early because they assume you will use them really wide on a dirt bike with no bar ends so you must do one of two things. Either drill the taper wider all the way to 9/16 inside diameter, or you can hack saw some of the metal end of your bar end so it fit's in. All in all these bars have been great and the lower rise is amazing in the trees and gives you more pull before your arms bottom out, especially if you are on the shorter side like me (5'-9"). Good luck!

 

[CoyoteGirl]

WOW!! Can't wait to see some action shots.. that wrap is gonna POP for sure!