Another Nytro coolant routing help

[Coxy]

Hey guys, just installed the CR 3" cooler on my Nytro. For some reason im not making sense of where to T the extra hose to now. Its an aftermarker tunnel with U cooler, and board coolers. Just not pictureing direction of flow so im having troubles.

On a side topic, anyone ever delete the T-stat/housing with any sucess? Probably a bad idea, just everything under/beside the intercooler is so god damn tight, it would clean it up a lot...
Thanks guys
Brian

 

[SNWMBL]

I've been running without the thermostat for almost 3 years now and haven't had any problems. I've also been running without the coolant bottle. I used an AC coolant bottle, then a Mountain Max fill bottle, and last year I made my own all in one unit. About as clean as you can get.

 

[Coxy]

That's a slick setup not sure if have the room with the a/a intercooler, but I like it!
Anyone else running the 3" CR cooler mod that could assist with the hose re-routing?

 

[up-high]

Don't know about the cooler. It still gets hot with the running board coolers and the u cooler?

 

[Coxy]

No problems at all with heat, even without scratchers. I ran the sled up a rock face last spring and tore the pan and front cooler out of it, so went with the cr cooler and 3" track.

 

[Coxy]

Anyone with the 3" front cooler able to snap me a pic of where the upper hose gets re-routed to? Thanks guys!

 

[Coxy]

Anybody? Sleds coming together quick and could use the assistance!