S smo219 New member Feb 24, 2010 #1 I have a 09 rmk 155 and will be riding @ 8-10000 ft, I did buy the mtx 68g weights. Any suggestions on weights and springs. The sled is stock.
I have a 09 rmk 155 and will be riding @ 8-10000 ft, I did buy the mtx 68g weights. Any suggestions on weights and springs. The sled is stock.
K Kleiny Free Member Feb 25, 2010 #2 for 10k you need to run the mtx 62gram weights, slp blue pink primary spring, and pink exaust springs, I tried the 68 grams but couldn't pull over 7800 rpms, with this set up I am pulling 8200- 8300rpms with no rivets
for 10k you need to run the mtx 62gram weights, slp blue pink primary spring, and pink exaust springs, I tried the 68 grams but couldn't pull over 7800 rpms, with this set up I am pulling 8200- 8300rpms with no rivets
H hardhat32 Free Member Feb 25, 2010 #3 Below is a link to a thread with a setup that would be pretty close for you. http://www.snowestonline.com/forum/showthread.php?t=203672
Below is a link to a thread with a setup that would be pretty close for you. http://www.snowestonline.com/forum/showthread.php?t=203672
