Someone asked a little while ago about anodizing the stock spindles, here are some pics of a type II (hard coat anodizing).
Anodized Spindles
- Thread starter hyperduc
- Start date
Yes, the rails were done the same.
duc,
Looks awesome!!
Did you do true hard Ano (type III)
or Decorative Ano (Type II)??
.
Looks awesome!!
Did you do true hard Ano (type III)
or Decorative Ano (Type II)??
.
I called the shop that did the anno. they used a process known as AMS 2469, I looked it up and it's actually a type III.
I've had this same place do some suspension pieces for an engineering project I was working on, they did this same anno with a ptfe coating. The finished product held surprisingly well.
Duc,
Thank you for that.
That sounds like just what I need to find a shop for!!
Were they reasonable in the pricing? Turnaround time? Small orders?
Can you share their contact info?
.
Thank you for that.
That sounds like just what I need to find a shop for!!
Were they reasonable in the pricing? Turnaround time? Small orders?
Can you share their contact info?
.
Anodizing and metal coatings in SLC utah, they will do any batch size but they have a min order of $30.
I did the rear bumper stays, holtz rear bumper, holtz tie rods, rails, rail braces, bogie wheel mounts, bar mounts, rear wheel spacer, spindles and front shock spacers for $130.
And that included blasting a lot of the parts to a consistent finish after I cleaned up some of the casting mold marks.
I did the rear bumper stays, holtz rear bumper, holtz tie rods, rails, rail braces, bogie wheel mounts, bar mounts, rear wheel spacer, spindles and front shock spacers for $130.
And that included blasting a lot of the parts to a consistent finish after I cleaned up some of the casting mold marks.
A
Aussie Niko
Well-known member
Someone asked a little while ago about anodizing the stock spindles, here are some pics of a type II (hard coat anodizing).
Gotta ask, what brand is the top black vent?
Frog skinz on the hood, and the upper panel vents. 2cool side air vents.
Looks killer!!!! thanks for the help on my thread too!!
Duc.... This one??
.
.
Man, that looks GOOD.
Someone asked a little while ago about anodizing the stock spindles, here are some pics of a type II (hard coat anodizing).
right place
These are the same guys that do all of kelsey's stuff over at RKT.
Let me know if you need a middle man to get it to and from, I work just down the road from these guys.
These are the same guys that do all of kelsey's stuff over at RKT.
Let me know if you need a middle man to get it to and from, I work just down the road from these guys.
Last edited:
B
Bull
Well-known member
had an "out loud chuckle" at that one...actually popped into my head "holy cr*p, here is a guy even more "detail oriented" than me?? sled looks great. duc, do you find the rails shed snow any better?
sled looks great. duc, do you find the rails shed snow any better?
This sled still hasn't hit the snow yet, however the last sled I did it to never would collect any build up.
Clean looking sled.... bump for a good topic
S
sledneck_03
Well-known member
ive acctually had that first pic as my computer background a couple times. I have it saved in my pics file. Very clean looking, love the color combo, Just needs some black 2013 boards haha
I noticed a bit of dirt in the garage floor seam. I like anodizing over powder coat X100. Great looking sled!
Similar threads
