They say when you start the sled the green light should scroll back and forth, mine starts with two oranges. They say this meens bad ground or connection I inspected all this and good. Any one know any resistance values to look for or have any thoughts. First few rides the sled pulled good not so much now tipical wiring issue hard to find.
additude issues
- Thread starter ridgerunner69
- Start date
Do you have an Attitude Controller?
If you see solid lights at idle you are good. I would say you are good to go.
Connection issues will be display by the first LED(green) and the eighth LED(red) will be blinking. This will tell you there is a problem with channel 1 on the controller. If the second LED(green) and the eighth LED(red) is blinking then this is problem on the 2nd channel.
If this doesn't help you and you still have questions please give me a call at 877-764-3337
Chris
If you see solid lights at idle you are good. I would say you are good to go.
Connection issues will be display by the first LED(green) and the eighth LED(red) will be blinking. This will tell you there is a problem with channel 1 on the controller. If the second LED(green) and the eighth LED(red) is blinking then this is problem on the 2nd channel.
If this doesn't help you and you still have questions please give me a call at 877-764-3337
Chris
